Spring loaded knife edge seal provides positive sealing for variable length cartridges
Mounting bracket kit included for easy installation
Numerous gasket options for compatibility with most fluids
Food & Beverage Electronics
Oil Inks / Paints / Coatings
Coolants Pulp & Paper
Specifications & Operating Parameters:
Maximum Operating Pressure: 300 psig (20.7 bar)
Maximum Temperature: 200°F (93°C)
Maximum Flow rate: 7 gpm (26.5 lpm)
Cartridge dimensions: 9 3/4" L x 2 7⁄8"" Dia.
System dimensions: 13 9/16" L x 3.5" Dia.
Inlet /Outlet: 3/4" FNPT
Drain: 1/8" NPT Plug
Gaskets: Buna N (optional: EPR, Viton)
Operating temperature range: 40 –180 degrees Fahrenheit
Chlorine taste & odor reduction >10,000 g @ 1 gpm
Pressure reduction @ flow rate as tested by manufacturer:
2 psi @ 0.5 gpm
10 psi @ 4 gpm
15 psi @ 6 gpm
Actual flow rates depend upon incoming pressure, fluid, viscosity, cartridge type, micron ratings and other factors.
304L Stainless Steel Head and Shell
Bonded PAC filter media
Polypropylene end caps
WARNING: Do not use with water that is microbiologically unsafe, or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
NOTE: The contaminants or substances removed or reduced by this water treatment device are not necessarily in your water.
NOTE: Performance capacity depends on system design, flow rate and certain other application conditions. Certain states require system registration or certification for health-related reduction claims.
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the instructions for flushing the cartridge to remove fines.